Garment Printer – Eight Capabilities to Take Into Account When Selecting a Garment Printer.

Do you need to add a photo to the quilt that looked a lot more like portion of the fabric than an iron-on decal?

Before, we trusted photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a fantastic new way to get your chosen photo from the scrapbook and on to your quilt block.

Direct-to-garment (DTG) printing is a type of digital printing. By using a expense of about $20,000, it’s not practical to run out and purchase your personal DTG printer. The common price for ripple printer is $8 to $10.

This procedure might be a higher priced compared to traditional photo transfer method. That’s partially because the technology is indeed new. If you do choose to consider using a DTG photo in your memory quilt block, there are many things to look for when deciding on the printer that will carry out the meet your needs:

1. Make sure there are actually no chemicals necessary to pre-treat your fabric first. Some DTG printers create a photo that is more like screen printing. You don’t want that appear to be or feel on the quilt. The ink will probably be hard on the top of the fabric and will eventually (sometimes much earlier than later) are going to crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. If you can notice the ink is raised over the surface at all by any means, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a type of digital DTG printing offered by the Brother GT 541. There are actually no chemicals necessary to pre-treat the material. The inks bond with the natural fibers and they are heat cured setting the photo. The inks are water based, which assists leave a soft yet crisp image in your fabric.

There are a few downfalls to using uv printer on your own quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form an electronic printing, there is absolutely no white ink. White is the absence of color. Which means that you are unable to print a picture on deep blue or black fabric.

Digital garment or fabric printing is actually a CMYK format – cyan, magenta, yellow, and black. You are able to mix those colors to obtain a full spectrum of accurate colors – not white. You can find DTG printers that print white ink, but most of those require chemical pre-management of the material and definately will leave you with that thick surface print.

You must make use of a light colored or neutral fabric and it needs to be cotton or a cotton blend. The material must have the ability to withstand 350 degrees for approximately 30 seconds. In case you are not 09dexypky with one hundred percent cotton or even a 50/50 blend, ask your printer in case the fabric will work.

Dimensions of your print might be a limitation. Most DTG printers possess a printing field approximately 14 inches x 16 inches. For almost all quilters, that size range won’t be a problem.

And speaking of printing fields, here’s a hint. Most direct to dtg printer charge to get a 14×16 surface. Should your blocks enables 2 or 3 photos to fit within that range, you could get them printed for the price of one. Consult with the printer to ascertain if it’s possible along with your particular project.

Like other technological advances, the price tag on digital garment (or fabric) printing will probably decrease after a while. Maybe it would be on smaller printers for home and private use. For the time being, try to find a DTG printer for your upcoming photo quilt project. The final results will look like custom fabric, that is to be a great touch for your personal unique quilt!